I didn’t like the way the top of the old frame had been joined into the Camaro clip, it had been cut too short by the look of it and hammered down until it touched the clip. It didn’t look the strongest of joins to say the least. A couple of quick cardboard templates later, I cut out some pieces of box and welded them in place.

Next on the list was to repair the outriggers ready to put them back in place. They had been hacked about when they put the clip on as well, so I’d taken them off to straighten them out and repair the holes.

A little work with some scrap and the gas torch and they were as good as a fifty year old bracket gets I suppose!