I set about cleaning up the front valance and the other wing today. With the car all painted, I decided to work on the drive as it makes an incredible amount of mess. Valance cleaned up easily, two big dents that had been filled amd a split were the only problems. Both dents came out easily with the hammer and dollies, so not much more work needed on that. The wing turned out to be full of filler, some of which was at least half an inch thick. I ended up using the grinder brush to get it out of the dents.

It looks like it had been dented quite badly in the past, and knocked about with a ball pein hammer. There were also a few big dents on the top and the wing extension was out by about a centimetre at the join with the arch. I spent about two hours getting it all back in shape as best I could, and was pretty pleased with the result. There were still a lot of small dents from where it had been hammered, but at least it was the right shape. I tacked the wing extension in the middle and hammered the front level before tacking it in place. To get the arch to line up I cut a line through it with the cut off wheel, and pulled it back in and welded it up. Some more shaping with the hammer, and then filled it all in with the welder and gound it out before skimming it quickly. Was time to call it a day, but should be able to get it done next time I’m in the garage.