I decided to get the drivers door to filler primer stage today, as I wanted to have a go of my Devilbiss GTi I’d won on Ebay and see if I got a decent result. It had a few pinholes in the filler, and a patch I was not happy with, so I filled and re-sanded it and in a fit of madness used the clarke gun instead of the Devilbiss. It was OK, but not great, so I did it again with the Devilbiss and got a much better finish. I wet sanded it once it was dry, and there was some patterning still visible from the Clarke (orange peel). I left it to do on Sunday, and started cleaning the Currie 9″ axle ready to put it under the frame. The pumpkin has been painted, but is chipped and peeling in places. I’ll get the worst of it off and paint it anyway.