I needed to get at the other side of the cab and do some work, and I was really fed up of whacking my legs on the frame trying to get to my workbench or move around the garage. I decided that the answer would be to pull the cab off completely, take all the suspension off the frame and shove it on...

I've been slowly plodding on with the mountain of metalwork on the truck, and wanted to get the front end back on out of the way. I decided to get the firewall partially welded in while I could get at it easily so stripped the intake manfold off and taped it all up ready to work on it. After a bi...

With the garage cleaned out to make space for it to live in, I got the truck dropped back home. I had the new engine sat on a stand so needed to sit it between the rails temporarily on some wooden blocks to make space for the truck. With the motor being a truck motor it has a very deep pan which...

I've been keeping an eye out for the various bits I need for the F100 and with the engine plans one of those is a decent strong axle. I found a 12 bolt axle with hardened shafts and C clip eliminators that was a few inches narrower than the one under there which suited me perfectly. I'd bought a...