I didn't like the way the top of the old frame had been joined into the Camaro clip, it had been cut too short by the look of it and hammered down until it touched the clip. It didn't look the strongest of joins to say the least. A couple of quick cardboard templates later, I cut out some pieces...

With the frame on its side to work on, I could get to work on the spring pockets. I put the lower A arm back on temporarily, and bolted the Shockwave front shock to it. They were too wide for the pocket, so I cut all the way round the outer edge and folded it all back until they had a decent...

With some paint on the cab, I moved on to some of the other bare metal bits that were sat in the garage. I had two pretty ropey front valance panels and had started to make one good one from them. I didn't plan on running a front bumper so I wanted the bumper holes filled in too. I cut out t...

After what seems like forever, I finally got to a point where I thought I wasn't going to get the roof any better without cutting it off and starting again. With that being a bit too drastic for me, I decided to use filler instead. It was surprising how much better it suddenly looked with just a...