I'd bought a complete Camaro LT1 and 4L60-E off ebay a few years ago and planned to freshen it and replace the Impala one. I got Zane to strip and check it and he found no problems so I ordered up a full set of gaskets and a beefier cam and he rebuilt it ready to swap in. While he had the car I g...

With the Camaro back home. I set about the huge amount of wiring that needed doing to get it ready for using again. I decided to change some of it again, and got it tucked up out of the way. I also needed to fit the rest of the Vinage Air AC system so it was starting to get tight under the dash....

The chassis work that needed doing after the accident was getting done by Zane at Zannetec and when I sat down with him to work out exactly what needed to be done, he agreed to fit the AC at the same time as the repairs. The rear axle turned out to have a bent halfshaft and was in need of a rebui...

After seeing the state of the Camaro at the bodyshop that was storing it, I decided to pay to have it recovered back to the house and put it on the drive. It wasn't going to be going anywhere quickly as Christmas was in the way and it turned out that I had a load of rear chassis damage and a bent...